http://dmunsie.wordpress.com/code/hacks/

…we had an HFS+ filesystem at work that had become corrupted to the point that fsck and DiskWarrior wouldn’t fix it. The problem was that the journal had become corrupted, and fsck.hfs doesn’t know how to actually fix the journal.

I used his code to hack on the partition, disable the journal, and got the files back.  Awesome.

SupportConnect knowledge base at Computer Associates

For Example: If I use Word 2007 and select Send – Email, Word sits around forever waiting for Outlook to open.  If I finally kill Outlook in Task Manager, then Word pops back with the message Word couldn’t send mail because of MAPI failure: “Unspecified error.”

I have similar problems using the Windows XP right-click “Sent To – Mail Recipient” feature.

If Outlook is alreay open, it all works perfectly.

After many attempts to clean up, repair Office, knowledge base searches, etc… I finally found the answer buried at the bottom of a forum posting here:  http://office-outlook.com/outlook-forum/index.php?t=msg&th=133715/

Uninstalling Apples Mobile Device Support (part of an Itunes install) fixed it.

Weird.  I uninstalled that component and all is well now.

Other search terms to help find this article:  MAPI Unspecified Error, can’t send from QuickBooks, Can’t use Send To if Outlook is closed.  Outlook 2007

The IPSec driver has entered Block mode. IPSec will discard all inbound and outbound TCP/IP network traffic that is not permitted by boot-time IPSec Policy exemptions. User Action: To restore full unsecured TCP/IP connectivity, disable the IPSec services, and then restart the computer.  For detailed troubleshooting information, review the events in the Security event log.

Followed by:

The IPSEC Services service terminated with the following error:
Only one usage of each socket address (protocol/network address/port) is normally permitted.

Here’s the fix: http://support.microsoft.com/kb/956189

I recently had this exact problem on my Windows XP computer. I finally tracked down this one posting, and it solved my problem. Even though I’m using XP and not Vista, the solution was exactly the same. I clam no credit for the solution, full credit goes to the original author.
Hope it works for you.

I just recently got a Blackberry Pearl and had some issues syncing it with my Windows Vista system (ah, Vista, always trying to be difficult). Every time I plugged my device into my laptop I would get a message about “unable to fin device driver software for RIM Composite Device”. I searched this forum, pinstack and google and mostly found discussions regarding this problem but with no definitive response as to what to do. Well after a grand total of 5.5 hours (2.5 one night, 3 the next night) on the phone with Blackberry and T-Mobile I finally figured out the problem and figured out how to get rid of the message. I thought I would post this for anyone experiencing the same problem I did.

DISCLAIMER: I am in no way a professional, in fact I’m a BB newbie, follow these procedures at your own risk. While following this procedure you are responsible for what happens to your computer, I’m simply putting this out there because it was the only way I could get it to work.

1. Plug device directly into your laptop/PC
2. When “found new hardware” message pops up choose the first option “Have windows automatically search for me”
3. After receiving the message that says “Windows was unable to find the software” it gives you the option of finding the software on your own or inserting the disc that came with your device (note: I tried the CD that came with my device but it did not work, I’m assuming since you’re reading this, yours didn’t work as well) – Hit “Cancel”
4. After you have been told by your computer that the driver software install failed right click on your “Computer” icon on your desktop.
5. From there click Properties
6. Go to Device Manager
7. In device manager you should see “RIM Composite Device” under ports with a Yellow exclamation point next to it – right click on it
8. Click “Properties” and go to the “Driver” tab.
9. Click the icon that says update driver.
10. A new window pops up that says “browse for driver software on your computer” at the bottom of this window there is an option that says “let me pick from a list of device drivers on my computer” Click on this link.
11. Scroll down the list on the left until you get to “Research in Motion” on the right you will see “Blackberry Device” highlight it and click next
12. You will see a message pop up that says something along the lines of “installing this device driver is not recommended b/c windows can’t verify that it is compatible with your hardware, etc.” Click “Yes”
13. the driver should install and you should get a message that states “Driver Software install successful”

The final test is to unplug your device and plug it back in and see if you get the message again.

Oh goodie. For the non-graphical out there:

ActiveSync cannot log on to Microsoft Outlook. Make sure Microsoft Outlook is installed and functioning correctly. You may need to restart your computer. You could have a conflict due to two folders on this computer are named C:Program FilesMicrosoft and C:Program FilesMicrosoft Office. If so, rename the C:Program FilesMicrosoft folder so that it does not contain the word “Microsoft.” If this folder contains subfolders, you may need to reinstall programs in the renamed folder. For more information on renaming folders and installing programs, see Help for your operating system.

I’ve got a better idea. How about I rename my Operating System so it no longer contains the name “Microsoft”, hmmm?

Update: A reboot fixed the problem.  So, don’t panic, just reboot – It’s Microsoft!

\serversharename is not accessible.
You might not have permission to use this network resource.
Contact the administrator of this server to find out
if you have access permissions.

Not enough server storage is available to process this command.

It’s useless. The message implies that one of two things are wrong:

1. I no longer have permission.
2. The server is full.

Neither is true of course, and you could spend an afternoon looking for the source of the problem.

The answer is buried in a Microsoft article titled “Antivirus software may cause Event ID 2011″. Of course, this is the sort of thing that makes the typical user absolutely nuts.

Let me back up and restart this rant properly. I have a Windows server. It has some shares. Clients on the network do backups daily to those shares. One day, they start getting this error message. Why? Nothing else has changed. Not only that, but other shares on the same machine work fine.

So here is the solution:

http://support.microsoft.com/default.aspx?scid=kb;en-us;177078

It’s enough to make you crazy.

The server knows it hasn’t got enough stack space? And it knows that it just needs to allocate more? So do it already. I’m betting that the programmers that coded the error routine could have coded a self-healing routine instead.

Symptoms

1. When you open Services.msc applet, the Windows Firewall/Internet Connection Sharing (ICS) service may not be available in the listing
2. Windows Firewall/Internet Connection Sharing (ICS) service is available in Services listing, but you are unable to start the service
3. You receive the following error message while accessing the firewall settings (firewall.cpl)

Due to an unidentified problem, Windows cannot display Windows Firewall settings.

Solution

I found the solution at http://windowsxp.mvps.org/sharedaccess.htm and restated the solution here in case the other site is unavailable. If Windows Live OneCare is installed, you may ignore the error message. OneCare uses it’s own firewall.

Cause

A missing or corrupt SharedAccess registry key.

Resolution

Create a .REG file containing the following:

Windows Registry Editor Version 5.00

[-HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesSharedAccess]

[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesSharedAccess]
"DependOnGroup"=hex(7):00,00
"DependOnService"=hex(7):4e,00,65,00,74,00,6d,00,61,00,6e,00,00,00,57,00,69,00,
  6e,00,4d,00,67,00,6d,00,74,00,00,00,00,00
"Description"="Provides network address translation, addressing, name resolution and/or intrusion prevention services for a home or small office network."
"DisplayName"="Windows Firewall/Internet Connection Sharing (ICS)"
"ErrorControl"=dword:00000001
"ImagePath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,
  74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,
  00,76,00,63,00,68,00,6f,00,73,00,74,00,2e,00,65,00,78,00,65,00,20,00,2d,00,
  6b,00,20,00,6e,00,65,00,74,00,73,00,76,00,63,00,73,00,00,00
"ObjectName"="LocalSystem"
"Start"=dword:00000002
"Type"=dword:00000020

[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesSharedAccessEpoch]
"Epoch"=dword:00002cd0

[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesSharedAccessParameters]
"ServiceDll"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,
  00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,
  69,00,70,00,6e,00,61,00,74,00,68,00,6c,00,70,00,2e,00,64,00,6c,00,6c,00,00,
  00

[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesSharedAccessParametersFirewallPolicy]

[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesSharedAccessParametersFirewallPolicyDomainProfile]

[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesSharedAccessParametersFirewallPolicyDomainProfileAuthorizedApplications]

[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesSharedAccessParametersFirewallPolicyDomainProfileAuthorizedApplicationsList]
"%windir%system32sessmgr.exe"="%windir%system32sessmgr.exe:*:enabled:@xpsp2res.dll,-22019"

[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesSharedAccessParametersFirewallPolicyStandardProfile]

[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesSharedAccessParametersFirewallPolicyStandardProfileAuthorizedApplications]

[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesSharedAccessParametersFirewallPolicyStandardProfileAuthorizedApplicationsList]
"%windir%system32sessmgr.exe"="%windir%system32sessmgr.exe:*:enabled:@xpsp2res.dll,-22019"

[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesSharedAccessSetup]
"ServiceUpgrade"=dword:00000001

[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesSharedAccessSetupInterfacesUnfirewalledAtUpdate]
"All"=dword:00000001

[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesSharedAccessEnum]
"0"="RootLEGACY_SHAREDACCESS000"
"Count"=dword:00000001
"NextInstance"=dword:00000001

Then double-click the .REG file to merge the contents to the registry. The Services entry will be created. Restart Windows (mandatory step, otherwise the following NETSH command will display an error message).

After restarting Windows, run this from Command Prompt (cmd.exe)

   NETSH FIREWALL RESET

Launch firewall applet from Control Panel, and then configure your Windows Firewall settings.

If none of the above methods help, as a last-resort solution (before reinstalling Windows XP Service Pack 2), give these two commands a try. Click Start, Run and type:

   rundll32 setupapi,InstallHinfSection Ndi-Steelhead 132 %windir%infnetrass.inf

Restart Windows, and then run this command (from Command Prompt):

   NETSH FIREWALL RESET

Attempt to start Firewall applet. Start the Windows Firewall service when prompted.

A client had a Ricoh CL4000DN printer, and it started flashing error code SC542. As it turns out, Ricoh error codes seem to be a closely guarded secret, and the local Ricoh rep wanted either $199 an hour or a yearly service contract to fix it. The printer was a 200 pound paperweight, because it wouldn’t finish internal diagnostics.

I investigated, and it appears the client had a power brownout just before the error occurred.

Turns out error SC542 indicates a fuser temperature problem. Once the error is detected, the printer is toast until you manually clear the error from the keypad. Even though the printer is physically fine, it won’t come ready until the prior error condition is cleared.

A few phone calls with our local Ricoh service rep, and he admitted that the printer might trip this error in a power brownout.

The printer was less than 30 days old and the error was caused by the brownout or the fuser failed. I kept calling the Ricoh rep, and they finally gave me the magic keystrokes over the phone.

I did the magic keystrokes, cleared the error code, and the printer worked fine. It’s been working great for a year now.

I hope someone else who has this problem finds this page and is able to fix the problem also. I didn’t find any help on the net when I searched.

The Fix

In order to clear error SC542, you must perform procedure 5810.

• Press and hold online + escape, then power on.
• Use up and down arrow keys to select SP2
• Press Enter
• Use up and down arror to locate SP5
• Press Enter
• Use up and down arrow keys to select 810
• Press Enter
• Confirm the selection
• Power off and on.

The error code is now cleared.

Summary

The fix worked. As I find other magic codes for Ricoh printers I’ll post them here.

If you have other information about Ricoh printers, or want to let me know how this worked for you, please discuss this article in our forum.

Update

This is the most popular article on our website, generating about 300 page views per month with people searching from Google and MSN. Obviously this is a popular problem. I’d be interested to know how your printer failed, maybe there is a design problem of some sort? Send me an e-mail and let me know. My address is david at fortc dot com.